Cleaning process of industrial parts
Parts cleaning is a comprehensive process that usually involves three key steps: washing, rinsing, and drying. Many craftsmen do not know that the available solutions for each of these steps can be as diverse as the parts to be washed, and it is very important to choose the appropriate technologies for each part of the […]
Zanzibar industrial parts
Ultrasonic cleaners can be effective in removing rust from metal parts, especially if the rust is not deeply embedded. The ultrasonic cleaning process involves the use of high-frequency sound waves to create microscopic bubbles in the cleaning solution. The collapse of these bubbles creates a tiny shock that can destroy various pollutants, including rust. Here […]
Degassing process in Kellner ultrasonic devices
The process of degassing or degassing in ultrasonic cleaning includes the removal of trapped gases from the cleaning liquid or solution inside the tank, before the actual cleaning operation begins…
Checking the performance and quality of the ultrasonic cleaning device
The aluminum foil test is a simple and extensive method used to check the efficiency of an ultrasonic bath…
Is it enough to use water alone in the ultrasonic cleaner?
Empty water can only clean the light pollution that is stuck to the surface of the parts; If to clean hard and sticky pollution and…
The mechanism of operation of ultrasonic baths
It comes with several ultrasonic transducers that are installed in the body of a tank made of stainless steel…
Effective parameters in ultrasonic washing
One of the most important parameters to maximize the cavitation energy, because many characteristic properties of the fluid depend on temperature…
Heat effect
For an ideal washing by ultrasonic cleaner, it is better that the temperature inside the tank is high, because both hot water has more cleaning power than cold water and most solutions…
Washing intercooler (Air Charge Cooler) and power plant equipment
Cleaning contaminated parts has often been a big challenge for various industries, including oil and gas and petrochemical industries. Despite all the efforts made in the design of processes and hardware to minimize deposits in these equipments…