Industrial series ultrasonic bath
The new series of ultrasonic cleaning devices (Ultrasonic Cleaner) Auto Lift Pro model has been designed and produced in collaboration with Germany’s Bandelin company in farasout Sanat group.
This series of products is for heavy and precise industrial use, including washing parts of automobiles, ships, trains, and planes, such as engine blocks, cylinder heads, gearboxes, landing gear, turbine blades, brake systems, as well as heavy parts of oil and gas industries, such as heat exchangers. , big valves and . . forecasted .
The following are among the most important advantages of these systems:
The use of very unique industrial ultrasonic devices of the German BANDELIN company
The possibility of adding different filters (grease filter, solid particle filter, etc.)
The possibility of turning into a complete washing line by adding rinse tanks, dryers, etc. . .
Use of pneumatic transport system for better loading of heavy parts
The possibility of connecting to the control network and PLC
Also, convenient use and very high ultrasonic power, even compared to similar European models, along with the updated design, are among the priorities of the designers of these devices.
Electrical specifications:
- Ultrasonic power: 4000 watts (16000 watts peak to peak)
- Heating power: 8000 watts
- Power source: 400 volts
- Working frequency: 25/40 kHz
Technical Specifications :
- Capacity: 500 liters
- Equipped with an ultrasonic generator and converter made by Bendelin, Germany *
- Internal tank made of stainless steel 316 with dimensions: 700 * 650 * 1200
- External cover made of stainless steel 304 with dimensions: 1100 * 1000 * 1600
- Stainless steel structure for loading parts with dimensions: 500 * 480 * 1000
- Stainless steel water level detection sensor
- Pneumatic lifting and lowering system for parts weighing up to 300 kg
- Overflow and linear spraying system and circulation pump to clean the tank surface
- Stainless steel inlet and outlet valves
- Stainless steel door with gas jack and moisture, heat and sound insulation
- Electric and pneumatic panel are built inside the device
Bendelin ultrasonic generator model LG4004
- Power 4000 watts
- 4 slots with separate controls
- Ability to change power from 0 to 100 percent
- It has a protection system during no load, overload and short circuit
- It has an RS232 port to connect to a computer
- Ability to connect to PLC
Bandelin ultrasonic transducer Flat transducer plates
- Made of two mm thick AISI 316 TIG welded stainless steel
- 40 or 25 kHz frequency
- Drip-proof HF cable.
Accessories (according to order):
- Display, programming and control system (PLC & HMI)
- Computer connection software
- Oil separator filter (OIL SEPARATOR) made by Bendelin Germany
- Particle separator filter (FA FILTER) made by Bandelin, Germany
- Vapor discharge channel
- Ventilator rinsing and drying tanks and. . .
- Manual compressed air nozzle
